WATERSAVERS "SAVINGS WITH COMFORT"
Settings & Installation for SHOWERs
RA10
Dourable Saving Shower Hose
Configuration
- 6 l/min – 1x thick black O-Rings.
- 8 l/min – 1x red O-Ring.
- 10 l/min – 2x thin black O-Ring – DEFAULT SETTING
- 12 l/min – 1x thin black O-Ring.
- 14 l/min – without O-Ring.
A sifter - for water containing coarse dirt particles – is not a part of a basic delivery.
Set Up
Step 1: Remove a plastic body from a metal fitting.
Step 2: Remove a seal.
Step 3: Prepare an O-ring for removal.
Step 4: Push out an O-ring with a pointed instrument
Step 5: Remove an O-ring from the flow restrictor and then assembly all the parts back together.
Installation
Installation of our water flow restrictors is very simple. It is easy to manage without using special tools.
Before you install the water flow restrictor consider if you want to keep the default flow rate setting or if you want to change it.
Step 1: Undo your shower set between the shower head and shower hose.
Step 2: Use your finger to remove gross filth from the thread of the tap. Wash the filth settled in the shower head/hose away.
Step 3: Screw water flow restrictor on between the shower head and shower hose. Make sure that the water flow restrictor is screwed on straight and tight, otherwise water splashing may come about.
Step 4: If you are not strong enought to tighten the water flow restrictor completly with your hand - use pliers.
Step 5: If the water flow restrictor doesn´t fit well on the thread of the shower head/hose or cause water splashing, remove it and start again.
Step 6: If you have problems with installation or if your water flow restrictor causes water splashing despite the right selection of it and correct installation please contact us.
Please "Like
What makes WATERSAVERS unique?
EVERY
DROP
COUNTS
save water...
...save life